Alcatel-Lucent 7705 - Table 51: Show Service ID DHCP Summary Output Fields

IES Command Reference
Page 402 7705 SAR OS Services Guide
interface
Syntax interface [{[ip-address | ip-int-name] [interface-type] [detail]} | summary]
Context show>service>id
Description This command displays information for the IP interfaces associated with the IES service.
Parameters ip-address — the IP address of the interface for which to display information
Values a.b.c.d (host bits must be 0)
ip-int-name — the IP interface name for which to display information
interface-type — displays either group or subscriber interfaces
detail — displays detailed IP interface information
summary — displays summary IP interface information
Output
The following output is an example of service ID interface information, and
Table 52 describes the
fields.
Table 51: Show Service ID DHCP Summary Output Fields
Label Description
DHCP Summary, service 4
Interface Name
SapID/Sdp
Name of the interface
Arp Populate Specifies whether ARP populate is enabled
Used/Provided Used — number of lease-states that are currently in use on the
specified interface; that is, the number of clients on the interface that
got an IP address by DHCP. This number is always less than or equal to
the “Provided” field.
Provided — lease-populate value configured for the specified
interface
Info Option Specifies whether Option 82 processing is enabled on the interface
Admin State Administrative state