VPRN Services Command Reference
Page 518 7705 SAR OS Services Guide
Show Router Commands
router
Syntax router [service-id]
Context show
Description This command provides access to the show commands for the service specified by the service-id.
Using service-id with this command applies only to VPRN service.
Parameters service-id — specifies the service-id
Values 1 to 2147483647
arp
Syntax arp [ip-address | ip-int-name | mac ieee-mac-addr] [sdp sdp-id:vc-id] [summary]
Context show>router
Description This command displays the router ARP table sorted by IP address.
If no command line options are specified, all ARP entries are displayed.
Parameters ip-addr — the IP address for which ARP entries will be displayed
ip-int-name — the interface name for which ARP entries will be displayed
ieee-mac-addr — the MAC address for which ARP entries will be displayed
sdp-id — the SDP ID for which ARP entries will be displayed
Values 1 to 17407
Default all SDPs
vc-id — the virtual circuit ID on the SDP ID
Values 1 to 4294967295
summary — displays summary APR table information
To Next Page
Loading...
