Alcatel-Lucent 7705 - Show Commands

VLL Services Command Reference
Page 272 7705 SAR OS Services Guide
Show Commands
all
Syntax all
Context show>service>id
Description This command displays detailed information for all aspects of the service.
Output
The following output is an example of service-id all information, and
Table 34 describes the fields.
Following the table are output examples for:
• Sample Output (Apipe ATMVpc Service)
• Sample Output (Cpipe Service)
• Sample Output (Epipe Service)
• Sample Output (Ipipe Service)
Sample Output (Apipe ATMVcc Service)
================================
*A:ALU-A>show>service# id 2 all
===============================================================================
Service Detailed Information
===============================================================================
Service Id : 2 Vpn Id : 0
Service Type : Apipe VLL Type : ATMVCC
Customer Id : 2
Last Status Change: 03/11/2008 19:58:19
Last Mgmt Change : 03/28/2008 19:49:51
Admin State : Down Oper State : Down
MTU : 1508
Vc Switching : False
SAP Count : 1 SDP Bind Count : 1
-------------------------------------------------------------------------------
Service Destination Points(SDPs)
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Sdp Id 2:2 -(138.120.38.1)
-------------------------------------------------------------------------------
SDP Id : 2:2 Type : Spoke
VC Type : ATMVCC VC Tag : 0
Admin Path MTU : 0 Oper Path MTU : 0
Far End : 138.120.38.1 Delivery : MPLS
Admin State : Up Oper State : Down
Acct. Pol : None Collect Stats : Disabled
Ingress Label : 0 Egress Label : 0
Ing mac Fltr : n/a Egr mac Fltr : n/a
Ing ip Fltr : n/a Egr ip Fltr : n/a