VLL Services Command Reference
Page 306 7705 SAR OS Services Guide
sap
Syntax sap sap-id [detail]
Context show>service>id
Description This command displays information for the SAPs associated with the service.
If no optional parameters are specified, a summary of all associated SAPs is displayed.
Parameters sap-id — identifies the SAPs for the service in the form slot/mda/port[.channel]
detail — displays detailed information for the SAP
Output
The following output is an example of service-id SAP information, and
Table 40 describes the fields.
Following the table are output examples for:
• Sample Output (Epipe)
• Sample Output (Ipipe)
Sample Output (Apipe)
*A:ALU-12>show>service>id# sap 1/4/1.1:2 detail
===============================================================================
Service Access Points(SAP)
===============================================================================
Service Id : 2
SAP : 1/4/1.1:2 Encap : atm
Description : Apipe SAP
Admin State : Up Oper State : Down
Flags : PortOperDown L2OperDown
Multi Svc Site : None
Last Status Change : 04/30/2008 13:55:04
Last Mgmt Change : 05/07/2008 15:51:51
Table 39: Service-ID Labels Output Fields
Label Description
Svc Id Identifies the service
Sdp Binding Identifies the SDP bound to the service
Type Indicates the SDP binding type (for example, spoke)
I. Lbl Displays the VC label used by the far-end device to send packets to this
device in this service by the SDP
E. Lbl Displays the VC label used by this device to send packets to the far-end
device in this service by the SDP
To Next Page
Loading...
