Alcatel-Lucent 7705 - Page 305

VLL Services
7705 SAR OS Services Guide Page 305
labels
Syntax labels
Context show>service>id
Description This command displays the labels being used by the service.
Output
The following output is an example of service-id labels information, and
Table 39 describes the
fields.
Sample Output
*A:ALU-12# show service id 1 labels
==============================================================================
Martini Service Labels
==============================================================================
Svc Id Sdp Binding Type I.Lbl E.Lbl
------------------------------------------------------------------------------
1 10:1 Spok 0 0
------------------------------------------------------------------------------
Number of Bound SDPs : 1
------------------------------------------------------------------------------
*A:ALU-12#
Suppress Standby
Signaling
Indicates whether standby signaling is suppressed
True — standby signaling is suppressed
False — standby signaling is not suppressed
Tx Active Identifies the actively transmitting spoke SDP
Tx Active Up
Time
Indicates the length of time that the active spoke SDP has been up
Revert Time
Count Down
Not applicable
Tx Active Change
Count
Indicates the number of times that there has been a change of active
spoke SDPs
Last Tx Active
Change
Indicates the date and time when a different spoke SDP became the
actively transmitting spoke SDP
Members
Spoke-sdp Identifies the primary and secondary spoke SDPs that are associated
with this endpoint and shows their precedence value (0 precedence
indicates the primary spoke SDP)
Table 38: Service-ID Endpoint Output Fields (Continued)
Label Description