Alcatel-Lucent 7705 - Basic Configuration

Basic Configuration
Page 426 7705 SAR OS Services Guide
Basic Configuration
The following fields require specific input (there are no defaults) to configure a basic VPRN
service:
• customer ID (refer to Configuring Customer Accounts on page 91)
• interface parameters
• spoke SDP parameters
The following example displays a sample configuration of a VPRN service.
*A:ALU-1>config>service>vprn# info
----------------------------------------------
vrf-import "vrfImpPolCust1"
vrf-export "vrfExpPolCust1"
route-distinguisher 10001:1
auto-bind ldp
vrf-target target:10001:1
interface "to-ce1" create
address 11.1.0.1/24
exit
sap 1/1/10:1 create
ingress
qos 100
filter ip 10
exit
egress
qos 1010
exit
exit
dhcp
description "DHCP test"
exit
exit
static-route 6.5.0.0/24 next-hop 10.1.1.2
no shutdown
----------------------------------------------
*A:ALU-1>config>service>vprn#