Alcatel-Lucent 7705 - Table 72: Application Qos Output Fields

VPRN Services
7705 SAR OS Services Guide Page 527
dscp-map
Syntax dscp-map [dscp-name]
Context show>router service-id>sgt-qos
Description This command displays the DSCP-to-FC mappings.
Parameters dscp-name — the specified DSCP name.
Values be | ef | | cp1 | cp2 | cp3 | cp4 | cp5 | cp6 | cp7 | cp9 | cs1 | cs2 | cs3 | cs4 | cs5 | nc1 |
nc2 | af11 | af12 | af13 | af21 | af22 | af23 | af31 | af32 | af33 | af41 | af42 | af43 | cp11
| cp13 | cp15 | cp17 | cp19 | cp21 | cp23 | cp25 | cp27 | cp29 | cp31 | cp33 | cp35 |
cp37 | cp39 | cp41 | cp42 | cp43 | cp44 | cp45 | cp47 | cp49 | cp50 | cp51 | cp52 | cp53
| cp54 | cp55 | cp57 | cp58 | cp59 | cp60 | cp61 | cp62 | cp63
Output
The following output is an example of DSCP-to-FC mapping information, and
Table 73 describes
the fields.
Sample Output
A:ALU-1# show router 6 sgt-qos dscp-map
===============================================================================
DSCP to FC Mappings
===============================================================================
DSCP Value FC Value Default FC Value
-------------------------------------------------------------------------------
be nc nc
cp1 be be
cp2 be be
cp3 be be
cp4 be be
cp5 be be
cp6 be be
cp7 be be
cs1 be be
Table 72: Application QoS Output Fields
Label Description
Application The DSCP or dot1p application
DSCP Value The DSCP name or value assigned to the application; if
you assign a value to the application (0 to 63), the
DSCP name that maps to the value is displayed
Default DSCP Value The default DSCP value
Dot1p Value The dot1p priority assigned to the application (applies
only to ARP and IS-IS)
Default Dot1p Value The default dot1p value