Alcatel-Lucent 7705 - Page 526

VPRN Services Command Reference
Page 526 7705 SAR OS Services Guide
dscp — specifies to show all DSCP applications
dot1p — specifies to show all dot1p applications
Output
The following output is an example of application QoS information, and
Table 72 describes the
fields.
Sample Output
*A:ALU-1>show# router 6 sgt-qos application
===============================================================================
DSCP Application Values
===============================================================================
Application DSCP Value Default DSCP Value
-------------------------------------------------------------------------------
bgp none none
dhcp none none
dns none none
ftp none none
icmp none none
ldp none none
ntp none none
ospf none none
radius none none
rsvp none none
snmp none none
snmp-notification none none
ssh none none
syslog none none
tacplus none none
telnet none none
tftp none none
traceroute none none
ptp none none
===============================================================================
===============================================================================
Dot1p Application Values
===============================================================================
Application Dot1p Value Default Dot1p Value
-------------------------------------------------------------------------------
arp none none
isis none none
===============================================================================
*A:ALU-1>show#