Alcatel-Lucent 7705 - Configuring Interface Parameters

Configuring IES Components
Page 342 7705 SAR OS Services Guide
Configuring Interface Parameters
Use the following CLI syntax to configure interface parameters for the IES management
service.
CLI Syntax: config>service# ies service-id [customer customer-id]
[create] [vpn vpn-id]
interface ip-int-name
address if-ip-address
bfd transmit-interval [receive receive-interval]
[multiplier multiplier]
description description-string
ip-mtu octets
no shutdown
Example: A:ALU-41>config>service# ies 5
A:ALU-41>config>service>ies# interface “ATMoIP
Management”
A:ALU-41>config>service>ies>if# address 3.3.3.3/24
A:ALU-41>config>service>ies>if# ip-mtu 1524
A:ALU-41>config>service>ies>if# no shutdown
A:ALU-41>config>service>ies>if#
The following example displays the IES interface creation output.
A:ALU-41>config>service>ies>if# info detail
-------------------------------------------
...
no description
address 3.3.3.3/24
ip-mtu 1524
no bfd
exit
no shutdown
...
-------------------------------------