VLL Services
7705 SAR OS Services Guide Page 245
Parameters sap-id — specifies the physical port identifier portion of the SAP definition
The sap-id can be configured in one of the formats described in
Table 32.
Values sap-id:null[port-id | bundle-id]
dot1q [port-id | bundle-id]:qtag1
atm [port-id | bundle-id][:vpi/vci |vpi |vpi1.vpi2]
cem slot/mda/port.channel
ipcp slot/mda/port.channel
port-id slot/mda/port[.channel]
bundle-type-slot/mda.bundle-num
bundle keyword
type ima, ppp
bundle-num 1 to 10
qtag1 0 to 4094
vpi NNI 0 to 4095
UNI 0 to 255
vci 1, 2, 5 to 65535
port-id — specifies the physical port ID in the slot/mda/port format
If the card in the slot has an adapter card installed, the port-id must be in the
slot_number/MDA_number/port_number format. For example, 1/2/3 specifies port 3 on MDA 2
in slot 1.
The port-id must reference a valid port type. When the port-id parameter represents TDM
channels, the port ID must include the channel ID. A period “.” separates the physical port from
the channel-id. The port must be configured as an access port.
bundle-id — specifies the multilink bundle to be associated with this IP interface. The bundle
keyword must be entered at the beginning of the parameter. The command syntax must be
configured as follows:
Table 32: SAP ID Configurations
Type Syntax Example
port-id slot/mda/port[.channel]1/1/5
null [port-id | bundle-id] port-id: 1/1/3
bundle-
id: b
undle-ppp-1/1.1
dot1q [port-id | bundle-id]:qtag1 port-id:qtag1: 1/1/3:100
bundle-id: bundle-ppp-1/1.1
atm [port-id | bundle-id][:vpi/vci |vpi] port-id: 1/1/1.1
bundle-id: bundle-ima-1/1.1
bundle-ppp-1/1.1
vpi/vci: 16/26
vpi: 16
cem slot/mda/port.channel 1/1/1.3
ipcp slot/mda/port.channel 1/2/2.4
To Next Page
Loading...
