Alcatel-Lucent 7705 - Table 74: Show Static ARP Table Output Fields

VPRN Services Command Reference
Page 530 7705 SAR OS Services Guide
static-route
Syntax static-route [ip-prefix /mask] | [preference preference] | [next-hop ip-address] [detail]
Context show>router
Description This command displays the static entries in the routing table.
If no options are present. all static routes are displayed sorted by prefix.
Parameters ip-prefix /mask — displays only the static routes matching the specified IP prefix and mask
preference — displays static routes with the specified route preference
Values 0 to 65535
ip-address — displays only the static routes with the specified next-hop IP address
detail — displays detailed information about the static route
Output
The following output is an example of static route information, and
Table 75 describes the fields.
Table 74: Show Static ARP Table Output Fields
Label Description
IP Address The IP address of the static ARP entry
MAC Address The MAC address of the static ARP entry
Expiry The age of the ARP entry. Static ARPs always have 00:00:00 for
the age.
Type Inv — The ARP entry is an inactive static ARP entry (invalid)
Sta — The ARP entry is an active static ARP entry
Interface The IP interface name associated with the ARP entry.
No. of ARP Entries The number of ARP entries displayed in the list.