Alcatel-Lucent 7705 - Creating an Ipipe Service; Configuring Ipipe SAP Parameters

VLL Services
7705 SAR OS Services Guide Page 213
Creating an Ipipe Service
Use the following CLI syntax to create an Ipipe service.
CLI Syntax: config>service# ipipe service-id [customer customer-id]
[vpn vpn-id] [vc-switching]
description description-string
no shutdown
The following example displays an Ipipe configuration example:
A:ALU-1>config>service# info
-------------------------------------------
...
ipipe 202 customer 1 create
description "eth_ipipe"
no shutdown
exit
-------------------------------------------
A:ALU-1>config>service#
Configuring Ipipe SAP Parameters
The following displays an Ipipe SAP configuration example:
A:ALU-48>config>service# info
----------------------------------------------
...
ipipe 202 customer 1 create
sap 1/1/2:444 create
description "eth_ipipe"
ce-address 31.31.31.1
exit
spoke-sdp 16:516 create
ce-address 31.31.31.2
exit
no shutdown
exit
...
----------------------------------------------
A:ALU-48>config>service#
The following displays a PPP to Ethernet local Ipipe example:
Example: config>service# ipipe 206 customer 1 create
config>service>ipipe$ sap 1/1/2:447 create
config>service>ipipe>sap$ description "eth_ppp_ipipe"
config>service>ipipe>sap$ ce-address 33.33.33.1
config>service>ipipe>sap$ no shutdown
config>service>ipipe>sap$ exit
config>service>ipipe# spoke-sdp 15:516 create