Alcatel-Lucent 7705 - Table 52: Show Service ID Interface Output Fields

Internet Enhanced Service
7705 SAR OS Services Guide Page 403
Sample Output
*A:ALU-2 show service id 4 interface
===============================================================================
Interface Table
===============================================================================
Interface-Name Adm Opr(v4/v6) Type Port/SapId
IP-Address PfxState
-------------------------------------------------------------------------------
to Internet Up Down/Down IES n/a
3.2.3.3/24 n/a
-------------------------------------------------------------------------------
Interfaces : 1
===============================================================================
*A:ALU-2
sap-using
Syntax sap-using [sap sap-id]
sap-using interface [ip-address | ip-int-name]
sap-using [ingress | egress] atm-td-profile td-profile-id
sap-using [ingress | egress] filter filter-id
sap-using [ingress | egress] qos-policy qos-policy-id
Context show>service
Description This command displays SAP information.
If no optional parameters are specified, the command displays a summary of all defined SAPs.
The atm-td-profile command applies only to HSDPA offload (that is, IES management service).
Table 52: Show Service ID Interface Output Fields
Label Description
Interface Table
Interface-Name Name of the interface
IP-Address IP address of the interface
Adm Administrative state of the interface
Opr (v4/v6) Operational state of the interface (in Release 3.0, only IPv4 addresses
apply)
Type Service type
Port/SapId
PfxState
Port or SAP associated with the interface