Alcatel-Lucent 7705 - Page 404

IES Command Reference
Page 404 7705 SAR OS Services Guide
Parameters sap-id — the SAP ID for which SAP information will be displayed
Values sap-id:null [port-id | bundle-id]
dot1q [port-id | bundle-id]:qtag1
atm [port-id | bundle-id][:vpi/vci |vpi |vpi1.vpi2]
port-id slot/mda/port[.channel]
bundle-type-slot/mda.bundle-num
bundle keyword
type ppp
bundle-num 1 to 10
qtag1 0 to 4094
vpi NNI 0 to 4095
UNI 0 to 255
vci 1, 2, 5 to 65535
ip-address — the IP address of the interface for which to display information
Values a.b.c.d (host bits must be 0)
ip-int-name — the IP interface name for which to display information
ingress — specifies matching an ingress policy
egress — specifies matching an egress policy
td-profile-id — displays SAPs using this traffic description
filter-id — the ingress filter policy ID for which to display matching SAPs
Values 1 to 65535
qos-policy-id — the ingress or egress QoS policy for which to display matching SAPs
Values 1 to 65535
Output
The following output is an example of service SAP-using information, and
Table 53 describes the
fields.
Sample Output
*A:ALU-48# show service sap-using
==============================================================================
Service Access Points
==============================================================================
PortId SvcId Ing. Ing. Egr. Egr. Adm Opr
QoS Fltr QoS Fltr
------------------------------------------------------------------------------
1/2/7:1 103 1 none 1 none Up Up
1/2/7:2 104 1 none 1 none Up Up
1/2/7:3 105 1 none 1 none Up Up
1/1/1.1 303 1 none 1 none Up Up
1/1/1.2 304 1 none 1 none Up Up
1/1/1.3 305 1 none 1 none Up Up
1/1/9.1:10/50 701 1 none 1 none Up Down
1/1/9.1:20 702 1 none 1 none Up Down
1/1/9.1:10/51 703 1 none 1 none Up Down
1/1/9.1:30 704 1 none 1 none Up Down