VPRN Services Command Reference
Page 514 7705 SAR OS Services Guide
Table 65: Show Service ID SDP Detailed Output Fields
Label Description
Sdp Id The SDP identifier
Type Indicates whether the SDP is a spoke or a mesh
VC Type The VC type: ether or vlan
VC Tag The explicit dot1Q value used when encapsulating to the SDP
far end
Admin Path MTU The operating path MTU of the SDP is equal to the admin path
MTU (when one is set) or the dynamically computed tunnel
MTU, when no admin path MTU is set (the default case)
Oper Path MTU The actual largest service frame size (in octets) that can be
transmitted through this SDP to the far-end router, without
requiring the packet to be fragmented
Far End The IP address of the remote end of the GRE, MPLS, or IP
tunnel defined by this SDP.
Delivery Specifies the type of delivery used by the SDP: GRE, MPLS, or
IP
Admin State The administrative state of this SDP
Oper State The operational state of this SDP
Acct. Pol The accounting policy applied to the SDP
Collect Stats Specifies whether accounting statistics are collected on the SDP
Ingress Label The label used by the far-end device to send packets to this
device in this service by this SDP
Egress Label The label used by this device to send packets to the far-end
device in this service by the SDP
Ing mac Fltr Not applicable
Egr mac Fltr Not applicable
Ing ip Fltr The ingress filter policy ID assigned to the SDP
Egr ip Fltr The egress filter policy ID assigned to the SDP
Admin ControlWord The administrative state of the control word: Preferred (control
word enabled) or Not Preferred (control word disabled)
Oper ControlWord The operational state of the control word: True (control word
enabled) or False (control word disabled)
To Next Page
Loading...
