VPRN Services
7705 SAR OS Services Guide Page 529
static-arp
Syntax static-arp [ip-address | ip-int-name | mac ieee-mac-addr]
Context show>router
Description This command displays the router static ARP table sorted by IP address.
If no options are present, all ARP entries are displayed.
Parameters ip-address — the IP address for which static ARP entries are displayed
ip-int-name — the interface name for which static ARP entries are displayed
ieee-mac-addr — the MAC address for which static ARP entries are displayed
Output
The following output is an example of static ARP table information, and
Table 74 describes the
fields.
Sample Output
*A:ALU-12# show router 6 static-arp
===============================================================================
ARP Table (Service: 6)
===============================================================================
IP Address MAC Address Expiry Type Interface
-------------------------------------------------------------------------------
10.200.0.253 00:00:5a:40:00:01 00:00:00 Sta to-ser1
12.200.1.1 00:00:5a:01:00:33 00:00:00 Inv to-ser1a
------------------------------------------------------------------------------
No. of ARP Entries: 2
==============================================================================
*A:ALU-12#
Table 73: DSCP-to-FC Mapping Output Fields
Label Description
DSCP Value The DSCP values (displayed as names) of the self-
generated traffic
FC Value The FC value mapped to each DSCP value
Default FC Value The default FC value
To Next Page
Loading...
