Alcatel-Lucent 7705 - Table 53: Show Service SAP-Using Output Fields

IES Command Reference
Page 406 7705 SAR OS Services Guide
service-using
Syntax service-using [ies] [customer customer-id]
Context show>service
Description This command displays the services matching certain usage properties. If no optional parameters are
specified, all services defined on the system are displayed.
Parameters ies — displays matching IES services
customer-id — displays only those services associated with the specified customer ID
Values 1 to 2147483647
Output
The following output is an example of service-using information, and
Table 54 describes the fields.
Sample Output
*A:ALU-2# show service service-using ies
===============================================================================
Services [ies]
===============================================================================
ServiceId Type Adm Opr CustomerId Last Mgmt Change
-------------------------------------------------------------------------------
4 IES Down Down 1 01/07/2010 22:14:40
23 IES Down Down 1 01/07/2010 21:58:44
-------------------------------------------------------------------------------
Table 53: Show Service SAP-Using Output Fields
Label Description
Service Access Point Using...
PortID ID of the access port where the SAP is defined
SvcID Service identifier
Ing.QoS SAP ingress QoS policy number specified on the ingress SAP
Ing. Fltr IP filter policy applied to the ingress SAP
Egr.QoS SAP egress QoS policy number specified on the egress SAP
Egr. Fltr IP filter policy applied to the egress SAP (not applicable)
Adm Desired state of the SAP
Opr Actual state of the SAP
Number of
SAPs/Saps
Number of SAPs using this service