Alcatel-Lucent 7705 - Configuring Ipipe SDP Bindings

Configuring VLL Components
Page 214 7705 SAR OS Services Guide
config>service>ipipe>sap>spoke-sdp$ ce-address 33.33.33.2
config>service>ipipe>sap-spoke-sdp$ exit
config>service>ipipe>$ exit
config>service>ipipe# no shutdown
config>service>ipipe# exit
config>service#
The following displays the output:
A:ALU-48>config>service# info
----------------------------------------------
ipipe 206 customer 1 create
sap 1/1/2:447 create
description "eth_ppp_ipipe"
ce-address 33.33.33.1
exit
spoke-sdp 15:516 create
ce-address 33.33.33.2
exit
exit
no shutdown
exit
exit
----------------------------------------------
Configuring Ipipe SDP Bindings
The following displays an Ipipe SDP configuration example:
A:ALU-48>config>service# info
----------------------------------------------
...
sdp 16 mpls create
far-end 4.4.4.4
ldp
path-mtu 1600
keep-alive
shutdown
exit
no shutdown
exit
...
ipipe 207 customer 1 create
shutdown
sap 1/1/2:449 create
description "Remote_Ipipe"
ce-address 34.34.34.1
exit
spoke-sdp 16:516 create
ce-address 34.34.34.2
exit
exit
...