Alcatel-Lucent 7705 - Service Management Tasks; Modifying VPRN Service Parameters

Service Management Tasks
Page 436 7705 SAR OS Services Guide
Service Management Tasks
This section discusses the following service management tasks:
• Modifying VPRN Service Parameters
• Deleting a VPRN Service
• Disabling a VPRN Service
• Re-enabling a VPRN Service
Modifying VPRN Service Parameters
Use the CLI syntax to modify VPRN parameters (VPRN Services Command Reference on
page 439).
The following example displays the VPRN service creation output.
*A:ALU-1>config>service# info
----------------------------------------------
...
vprn 1 customer 1 create
shutdown
vrf-import "vrfImpPolCust1"
vrf-export "vrfExpPolCust1"
route-distinguisher 10001:1
interface "to-ce1" create
address 10.1.1.1/24
sap 1/1/10:1 create
exit
exit
static-route 6.5.0.0/24 next-hop 10.1.1.2
spoke-sdp 2 create
exit
exit
...
----------------------------------------------
*A:ALU-1>config>service>vprn#