7705 SAR OS Services Guide Page 31
Getting Started
In This Chapter
This chapter provides the process flow information required to configure services.
Alcatel-Lucent 7705 SAR Services Configuration
Process
Table 1 lists the tasks necessary to configure subscriber services. This guide is presented in
an overall logical configuration flow. Each section describes a software area and provides
CLI syntax and command usage to configure parameters for a functional area.
Table 1: 7705 SAR Configuration Process
Area Task Reference
Subscriber services Configure subscriber services
Global entities Configuring Global Service Entities with CLI
on page 87
VLL services Apipe service ATM VLL (Apipe) Services on page 137
Cpipe service Circuit Emulation VLL (Cpipe) Services on
page 140
Epipe service Ethernet VLL (Epipe) Services on page 159
Ipipe service IP Interworking VLL (Ipipe) Services on
page 168
Internet Enhanced
Service
Configure a routed-IP connectivity
or Internet access service and
configure in-band management of
the 7705 SAR over ATM links
Internet Enhanced Service on page 329
To Next Page
Loading...
