Alcatel-Lucent 7705 - Table 69: Show DHCP Summary Output Fields

VPRN Services Command Reference
Page 522 7705 SAR OS Services Guide
interface
Syntax interface [{[ip-address | ip-int-name] [detail]}] | [summary] | [exclude-services]
Context show>router
Description This command displays the router IP interface table sorted by interface index.
Parameters ip-address — the IP address of the interface for which to display information
ip-int-name — the IP interface name for which to display information
detail — displays detailed IP interface information for the router
summary — displays summary IP interface information for the router
exclude-services — displays IP interface information, excluding IP interfaces configured for
customer services. Only core network IP interfaces are displayed.
Output
The following output is an example of standard IP interface information, and
Table 70 describes the
fields.
Table 69: Show DHCP Summary Output Fields
Label Description
DHCP Summary (Service: x)
Interface Name
SapID/Sdp
The name of the interface
Arp Populate Specifies whether ARP populate is enabled or disabled
Used/Provided Used — number of lease-states that are currently in use on the
specified interface; that is, the number of clients on the interface that
got an IP address by DHCP. This number is always less than or equal to
the “Provided” field.
Provided — lease-populate value configured for the specified
interface
Info Option Keep — the existing information is kept on the packet and the router
does not add any additional information
Replace — on ingress, the existing information-option is replaced
with the information-option from the router
Drop — The packet is dropped and an error is logged
Admin State The administrative state