Alcatel-Lucent 7705 - Page 343

Internet Enhanced Service
7705 SAR OS Services Guide Page 343
Use the following CLI syntax to configure interface parameters for the IES service.
CLI Syntax: config>service# ies service-id [customer customer-id]
[create] [vpn vpn-id]
interface ip-int-name
address if-ip-address
allow-directed-broadcasts
arp-timeout
bfd transmit-interval [receive receive-interval]
[multiplier multiplier]
description description-string
dhcp
description description-string
option
action {replace | drop | keep}
circuit-id [ascii-tuple | ifindex | sap-id |
vlan-ascii-tuple]
remote-id [mac | string string]
vendor-specific option
client-mac-address
sap-id
service-id
string text
system-id
server server1 [server2...(up to 8 max)]
no shutdown
trusted
icmp
mask-reply
ttl-expired [number seconds]
unreachables
ip-mtu octets
ipcp
dns ip-address [secondary ip-address]
dns secondary ip-address
peer-ip-address ip-address
mac ieee-address
no shutdown
static-arp ip-address ieee-mac-address
no shutdown
Example: A:ALU-41>config>service# ies 4
A:ALU-41>config>service>ies$ interface “to Internet”
A:ALU-41>config>service>ies>if$ address 3.2.3.3/24
A:ALU-41>config>service>ies>if$ dhcp option
A:ALU-41>config>service>ies>if>dhcp>option$ circuit-id
ifindex
A:ALU-41>config>service>ies>if>dhcp>option$ exit
A:ALU-41>config>service>ies>if$ ip-mtu 1524