Services Overview
7705 SAR OS Services Guide Page 111
phone
Syntax [no] phone phone-number
Context config>service>customer
Description This command adds telephone number information for a customer ID.
The no form of this command removes the phone number value from the customer ID.
Default No telephone number information is associated with a customer.
Parameters phone-number — the customer phone number entered as an ASCII string. Allowed values are any
string up to 80 characters long composed of printable, 7-bit ASCII characters. If the string
contains special characters (#, $, spaces, etc.), the entire string must be enclosed within double
quotes.
To Next Page
Loading...
