Global Service Command Reference
Page 122 7705 SAR OS Services Guide
md-name — specifies a generic Maintenance Domain (MD) name
Values 1 to 43 characters
level — specifies the integer identifying the maintenance domain level (MD level). Higher numbers
correspond to higher-level maintenance domains (those with the greatest physical reach) with the
highest values for customers’ CFM packets. Lower numbers correspond to lower-level
maintenance domains (those with more limited physical reach) with the lowest values for single
bridges or physical links.
Values 0 to 7
association
Syntax association ma-index [format {icc-based | integer | string | vid | vpn-id}] name ma-name
association ma-index
no association ma-index
Context config>eth-cfm>domain
Description This command configures the Maintenance Association (MA) for the domain.
The integer, string, vid, and vpn-id keywords apply to dot1ag MAs. The icc-based keyword applies
to Y.1731 MEGs, and is only available when the domain format is none. A MEP associated with
domain format none and association format icc-based is a Y.1731 MEP; otherwise the MEP is a
dot1ag MEP.
Parameters ma-index — specifies the MA index value
Values 1 to 4294967295
format {icc-based | integer | string | vid | vpn-id} — specifies a value that represents the type
(format) of the ma-name
Values icc-based: raw ASCII, exactly 13 characters (the association is a Y.1731 MEG, not
a dot1ag MA)
integer: 0 to 65535 (integer value 0 means the MA is not attached to a VID)
string:raw ASCII
vid: 0 to 4094
vpn-id: RFC 2685, Virtual Private Networks Identifier
XXX:XXXX where X is a value between 00 and FF
(for example 00164D:AABBCCDD)
Default integer
ma-name — specifies the part of the maintenance association identifier that is unique within the
maintenance domain name
Values 1 to 45 characters
To Next Page
Loading...
