Services Overview
7705 SAR OS Services Guide Page 127
sdp
Syntax sdp [sdp-id | far-end ip-address] [detail | keep-alive-history]
Context show>service
Description This command displays SDP information.
If no optional parameters are specified, a summary SDP output for all SDPs is displayed.
Parameters sdp-id — the SDP ID for which to display information
Default all SDPs
Values 1 to 17407
ip-address — displays only SDPs matching with the specified far-end IP address
Default SDPs with any far-end IP address
detail — displays detailed SDP information
Default SDP summary output
keep-alive-history — displays the last fifty SDP keepalive events for the SDP
Default SDP summary output
Output
The following output is an example of service SDP information, and
Table 14 describes the fields.
Sample Output
*A:ALU-12# show service sdp
===============================================================================
Services: Service Destination Points
===============================================================================
SdpId Adm MTU Opr MTU IP address Adm Opr Deliver Signal
-------------------------------------------------------------------------------
10 0 0 10.10.10.24 Up Down LDP TLDP
20 0 0 10.10.10.24 Up Down MPLS TLDP
30 4462 1514 10.20.1.21 Up Up GRE TLDP
-------------------------------------------------------------------------------
Number of SDPs : 3
-------------------------------------------------------------------------------
===============================================================================
*A:ALU-12#
*A:ALU-12# show service sdp 10
===============================================================================
Service Destination Point (Sdp Id : 10)
===============================================================================
SdpId Adm MTU Opr MTU IP address Adm Opr Deliver Signal
-------------------------------------------------------------------------------
10 0 0 10.10.10.24 Up Down LDP TLDP
===============================================================================
*A:ALU-12#