VLL Services
7705 SAR OS Services Guide Page 209
config>service>epipe>sap# egress
config>service>epipe>sap>egress# qos 432
config>service>epipe>sap>egress# exit
config>service>epipe>sap# no shutdown
config>service>epipe#
The following example displays the SAP configuration output for ALU-1 and ALU-2.
ALU-1>config>service# info
----------------------------------------------
...
        epipe 5500 customer 5 vpn 5500 create
            description "Distributed epipe service to east coast"
            sap 1/1/3:21 create
                ingress
                    filter ip 1
                    qos 555
                exit
                egress
                    qos 627
                exit
            exit
        exit
...
----------------------------------------------
ALU-1>config>service#
ALU-2>config>service# info
----------------------------------------------
...
        epipe 5500 customer 5 vpn 5500 create
            description "Distributed epipe service to west coast"
            sap 1/1/4:550 create
                ingress
                    qos 654
exit
egress
                    qos 432
exit
            exit
        exit
...
----------------------------------------------
ALU-2>config>service#
To configure a basic local Epipe service (SAP-to-SAP), enter the sap sap-id command 
twice with different port IDs in the same service configuration.