Alcatel-Lucent 7705 - Page 216

Configuring VLL Components
Page 216 7705 SAR OS Services Guide
The following displays an example of the command usage to configure a VLL service as a
PW switching service:
Example: ALU-1>config>service# apipe 5 customer 1 vpn 1
vc-switching create
config>service>apipe$ description “Default apipe
description for service id 100”
config>service>apipe# spoke-sdp 3:1 create
config>service>apipe>spoke-sdp# exit
config>service>apipe# spoke-sdp 6:200 create
config>service>apipe>spoke-sdp# exit
config>service>apipe# no shutdown
The following example displays configurations for each service:
*A:ALA-48>config>service# info
----------------------------------------------
...
apipe 100 customer 1 vpn 1 vc-switching create
description "Default apipe description for service id 100"
spoke-sdp 3:1 create
exit
spoke-sdp 6:200 create
exit
no shutdown
exit
...
cpipe 107 customer 1 vpn 107 vc-switching vc-type satop-e1 create
description "Default cpipe description for service id 107"
spoke-sdp 3:7 create
exit
spoke-sdp 6:207 create
exit
no shutdown
exit
...
epipe 107 customer 1 vpn 108 vc-switching create
description "Default epipe description for service id 108"
spoke-sdp 3:8 create
exit
spoke-sdp 6:208 create
exit
no shutdown
exit
...
ipipe 108 customer 1 vpn 109 vc-switching create
description "Default ipipe description for service id 109"
spoke-sdp 3:9 create
exit
spoke-sdp 6:209 create
exit
no shutdown
exit
...
----------------------------------------------
*A:ALA-48>config>service#