VLL Services Command Reference
Page 236 7705 SAR OS Services Guide
Generic Commands
description
Syntax description description-string
no description
Context config>service>apipe
config>service>apipe>endpoint
config>service>apipe>sap
config>service>cpipe
config>service>cpipe>endpoint
config>service>cpipe>sap
config>service>epipe
config>service>epipe>endpoint
config>service>epipe>sap
config>service>epipe>spoke-sdp
config>service>ipipe
config>service>ipipe>endpoint
config>service>ipipe>sap
config>service>ipipe>spoke-sdp
Description This command creates a text description stored in the configuration file for a configuration context.
The no form of this command removes the string from the context.
Default No description is associated with the configuration context.
Parameters description-string — the description character string. Allowed values are any string up to 80
characters long composed of printable, 7-bit ASCII characters. If the string contains special
characters (#, $, spaces, etc.), the entire string must be enclosed within double quotes.
shutdown
Syntax [no] shutdown
Context config>service>apipe
config>service>apipe>sap
config>service>apipe>spoke-sdp
config>service>cpipe
config>service>cpipe>sap
config>service>cpipe>spoke-sdp
config>service>epipe
config>service>ipipe
config>service>ipipe>sap
config>service>ipipe>spoke-sdp
To Next Page
Loading...
