Alcatel-Lucent 7705 - Page 318

VLL Services Command Reference
Page 318 7705 SAR OS Services Guide
Egress Queue 4
For. InProf : 0 0
For. OutProf : 200 15600
Dro. InProf : 0 0
Dro. OutProf : 0 0
===============================================================================
* indicates that the corresponding row element may have been truncated.
*A:ALU-12#
sap-using
Syntax sap-using [sap sap-id]
sap-using [ingress | egress] atm-td-profile td-profile-id
sap-using [ingress | egress] qos-policy qos-policy-id
Context show>service
Description This command displays SAP information.
If no optional parameters are specified, the command displays a summary of all defined SAPs.
The optional parameters restrict output to only SAPs matching the specified properties.
Parameters ingress — specifies matching an ingress policy
egress — specifies matching an egress policy
qos-policy-id — identifies the ingress or egress QoS Policy for which to display matching SAPs
Values 1 to 65535
td-profile-id — displays SAPs using this traffic description
sap-id — specifies the physical port identifier portion of the SAP definition
Values sap-id:null [port-id | bundle-id]
dot1q [port-id | bundle-id]:qtag1
atm [port-id | bundle-id][:vpi/vci |vpi |vpi1.vpi2]
port-id slot/mda/port[.channel]
bundle-type-slot/mda.bundle-num
bundle keyword
type ima, ppp
bundle-num 1 to 10
qtag1 0 to 4094
vpi NNI 0 to 4095
UNI 0 to 255
vci 1, 2, 5 to 65535
Output
The following output is an example of service SAP-using information, and
Table 41 describes the
fields.