Alcatel-Lucent 7705 - Page 321

VLL Services
7705 SAR OS Services Guide Page 321
sdp
Syntax sdp [sdp-id | far-end ip-address] [detail]
Context show>service>id
Description This command displays information for the SDPs associated with the service.
If no optional parameters are specified, a summary of all associated SDPs is displayed.
Parameters sdp-id — displays only information for the specified SDP ID
Values 1 — 17407
ip-address — displays only SDPs matching the specified far-end IP address
Default SDPs with any far-end IP address.
detail — displays detailed SDP information
Output
The following output is an example of service-id SDP information, and
Table 42 describes the fields.
Sample Output (Cpipe)
*A:csasim2>show>service>id# sdp 1 detail
===============================================================================
Service Destination Point (Sdp Id : 1) Details
===============================================================================
-------------------------------------------------------------------------------
Sdp Id 1:1 -(10.10.10.100)
-------------------------------------------------------------------------------
SDP Id : 1:1 Type : Spoke
VC Type : CESoPSN VC Tag : 0
Admin Path MTU : 0 Oper Path MTU : 0
Far End : 10.10.10.100 Delivery : LDP
Admin State : Up Oper State : Down
Acct. Pol : None Collect Stats : Disabled
Ingress Label : 0 Egress Label : 0
Ing mac Fltr : n/a Egr mac Fltr : n/a
Ing ip Fltr : n/a Egr ip Fltr : n/a
Admin ControlWord : Preferred Oper ControlWord : True
Admin BW(Kbps) : 0 Oper BW(Kbps) : 0
Last Status Change : 04/30/2008 13:55:10 Signaling : TLDP
Last Mgmt Change : 05/02/2008 21:37:14
Endpoint : N/A Precedence : 4
Class Fwding State : Down
Flags : SdpOperDown
NoIngVCLabel NoEgrVCLabel
PathMTUTooSmall
Mac Move : Ukwn Blockable Level : Unknown
Peer Pw Bits : None
Peer Fault Ip : None
Peer Vccv CV Bits : None
Peer Vccv CC Bits : None