VLL Services Command Reference
Page 328 7705 SAR OS Services Guide
all — clears all SAP queue statistics and STP statistics
cem — clears all queue statistics associated with a acem SAP
counters — clears all queue statistics associated with the SAP
sdp
Syntax sdp sdp-id keep-alive
Context clear>service>statistics
Description This command clears keepalive statistics associated with the SDP ID.
Parameters sdp-id — identifies the SDP for which to clear keepalive statistics
Values 1 to 17407
arp
Syntax arp
Context clear>service>id
Description This command clears the ARP entries from an Ipipe service.
spoke-sdp
Syntax spoke-sdp sdp-id:vc-id ingress-vc-label
spoke-sdp sdp-id:vc-id {all | counters}
Context clear>service>id
clear>service>statistics>id
Description This command clears and resets the spoke SDP bindings for the service.
Parameters sdp-id — the spoke SDP ID to be reset
Values 1 to 17407
vc-id — the virtual circuit ID on the SDP ID to be reset
Values 1 to 4294967295
all — clears all queue statistics and STP statistics associated with the SDP
counters — clears all queue statistics associated with the SDP
ingress-vc-label — clears the VC ingress value associated with the specified connection
To Next Page
Loading...
