IES Command Reference
Page 360 7705 SAR OS Services Guide
IES Global Commands
ies
Syntax ies service-id [customer customer-id] [create] [vpn vpn-id]
no ies service-id
Context config>service
Description This command enables Internet Enhanced Service (IES). In Release 3.0 of the 7705 SAR, IES is used
for direct IP connectivity between customer access points as well as in-band management of the
7705 SAR over ATM links.
The no form of this command deletes the IES service instance with the specified service-id.
The service cannot be deleted until all the IP interfaces defined within the service ID have been shut
down and deleted.
Parameters service-id — uniquely identifies a service in the service domain. This ID must be unique to this
service and may not be used for any other service of any type. The service-id must be the same
number used for every 7705 SAR on which this service is defined.
Values 1 to 2147483647
customer-id — specifies the customer ID number to be associated with the service. This parameter is
required on service creation and is optional for service editing or deleting.
Values 1 to 2147483647
vpn-id — specifies the VPN ID number, which allows you to identify virtual private networks (VPNs)
by a VPN identification number. If this parameter is not specified, the VPN ID uses the service
ID number. This parameter is not the same as the VRF ID used with VPRN services.
Values 1 to 2147483647
Default null (0)
To Next Page
Loading...
