IES Command Reference
Page 396 7705 SAR OS Services Guide
Oper State Operational state of the interface
IP Addr/mask IP address and subnet mask length of the interface
Address Type Specifies whether the IP address for the interface is the
primary or secondary address on the interface (in Release 3.0,
this is always primary)
Broadcast Address Broadcast address of the interface
If Index Interface index corresponding to the IES interface
Virt. If Index Virtual interface index of the IES interface
Last Oper Chg Date and time of the last operating state change on the
interface
Global IF Index Global interface index of the IES interface
SAP Id SAP identifier
TOS Marking Specifies whether the ToS marking state is trusted or untrusted
for the IP interface
If Type Type of interface: IES
IES ID Service identifier
MAC Address IEEE 802.3 MAC address
Arp Timeout Timeout for an ARP entry learned on the interface
IP MTU IP maximum transmit unit for the interface
ICMP Mask Reply Specifies whether the IP interface replies to a received ICMP
mask request
ARP Populate Specifies if ARP is enabled or disabled
ICMP Details
Unreachables Maximum number of ICMP destination unreachable messages
that the IP interface will issue in a given period of time, in
seconds
Disabled — indicates that the IP interface will not generate
ICMP destination unreachable messages
TTL Expired Maximum number of ICMP TTL expired messages that the IP
interface will issue in a given period of time, in seconds
Disabled — indicates that the IP interface will not generate
ICMP TTL expired messages
Table 47: Show Service ID All Output Fields (Continued)
Label Description
To Next Page
Loading...
