Alcatel-Lucent 7705 - Page 431

VPRN Services
7705 SAR OS Services Guide Page 431
The following example displays a VPRN interface configuration:
*A:ALU-1>config>service>vprn# info
----------------------------------------------
...
vprn 1 customer 1 create
vrf-import "vrfImpPolCust1"
vrf-export "vrfExpPolCust1"
route-distinguisher 10001:1
auto-bind ldp
vrf-target target:10001:1
interface "to-ce1" create
address 11.1.0.1/24
exit
exit
static-route 6.5.0.0/24 next-hop 10.1.1.2
spoke-sdp 2 create
exit
no shutdown
exit
...
----------------------------------------------
*A:ALU-1>config>service#
Use the following CLI syntax to configure interface parameters for the VPRN service.
CLI Syntax: config>service# vprn service-id [customer customer-id]
[create] [vpn vpn-id]
interface ip-int-name
address if-ip-address
allow-directed-broadcasts
arp-timeout
bfd transmit-interval [receive receive-interval]
[multiplier multiplier]
description description-string
dhcp
description description-string
option
action {replace | drop | keep}
circuit-id [ascii-tuple | ifindex | sap-id |
vlan-ascii-tuple]
remote-id [mac | string string]
vendor-specific-option
client-mac-address
sap-id
service-id
string text
system-id
server server1 [server2...(up to 8 max)]
no shutdown
trusted
icmp
mask-reply