Alcatel-Lucent 7705 - Page 472

VPRN Services Command Reference
Page 472 7705 SAR OS Services Guide
The no form of this command returns the system to the default.
Default remote-id
Parameters mac — the MAC address of the remote end is encoded in the suboption
string — the remote ID
Values up to 32 alphanumeric characters
vendor-specific-option
Syntax [no] vendor-specific-option
Context config>service>vprn>if>dhcp>option
Description This command enables the Alcatel-Lucent vendor-specific suboption of the DHCP relay packet and
enters the context for configuring the vendor-specific suboptions.
client-mac-address
Syntax [no] client-mac-address
Context config>service>vprn>if>dhcp>option>vendor
Description This command enables the sending of the MAC address in the Alcatel-Lucent vendor-specific
suboption of the DHCP relay packet.
The no form of the command disables the sending of the MAC address in the Alcatel-Lucent vendor
specific suboption of the DHCP relay packet.
Default no client-mac-address
sap-id
Syntax [no] sap-id
Context config>service>vprn>if>dhcp>option>vendor
Description This command enables the sending of the SAP ID in the Alcatel-Lucent vendor-specific suboption of
the DHCP relay packet.
The no form of the command disables the sending of the SAP ID in the Alcatel-Lucent vendor-
specific suboption of the DHCP relay packet.
Default no sap-id