Alcatel-Lucent 7705 - Page 486

VPRN Services Command Reference
Page 486 7705 SAR OS Services Guide
Vrf Export The VRF export policy applied to this service
SAP Count The number of SAPs specified for this service
SDP Bind Count The number of SDPs bound to this service
Service Destination Points (SDPs)
SDP Id The SDP identifier
Type Indicates whether this service SDP binding is a spoke or a
mesh
VC Type The VC type: ether or vlan
VC Tag The explicit dot1Q value used when encapsulating to the
SDP far end
Admin Path MTU The desired largest service frame size (in octets) that can be
transmitted through this SDP to the far-end router, without
requiring the packet to be fragmented
Oper Path MTU The actual largest service frame size (in octets) that can be
transmitted through this SDP to the far-end router, without
requiring the packet to be fragmented
Far End Specifies the IP address of the remote end of the GRE,
MPLS, or IP tunnel defined by this SDP
Delivery Specifies the type of delivery used by the SDP: GRE,
MPLS, or IP
Admin State The administrative state of this SDP
Oper State The operational state of this SDP
Acct. Pol The accounting policy applied to the SDP
Collect Stats Specifies whether accounting statistics are collected on the
SDP
Ingress Label The label used by the far-end device to send packets to this
device in this service by this SDP
Egress Label The label used by this device to send packets to the far-end
device in this service by this SDP
Ing mac Fltr Not applicable
Egr mac Fltr Not applicable
Ing ip Fltr The SDP ingress filter policy ID
Table 58: Show Service ID All Output Fields (Continued)
Label Description