Alcatel-Lucent 7705 - Page 497

VPRN Services
7705 SAR OS Services Guide Page 497
dhcp
Syntax dhcp
Context show>service>id
Description This command enables the context to display DHCP information for the specified service.
statistics
Syntax statistics [interface ip-int-name | ip-address]
Context show>service>id>dhcp
Description This command displays DHCP statistics information.
Parameters ip-int-name — the interface name for which DHCP statistics will be displayed
ip-address — the IP address of the interface for which to display information
Values a.b.c.d (host bits must be 0)
Output
The following output is an example of server ID DHCP statistics information, and
Table 61
describes the fields.
Service Access and Destination Points
Identifier The service access (SAP) and destination (SDP) points
Type The signaling protocol used to obtain the ingress and egress labels
used in frames transmitted and received on the SDP
AdmMTU The desired largest service frame size (in octets) that can be
transmitted through this SDP to the far-end router, without
requiring the packet to be fragmented
OprMTU The actual largest service frame size (in octets) that can be
transmitted through this SDP to the far-end router, without
requiring the packet to be fragmented
Adm The administrative state of the SAP or SDP
Opr The operating state of the SAP or SDP
Table 60: Show Service ID Base Output Fields (Continued)
Label Description