VPRN Services Command Reference
Page 500 7705 SAR OS Services Guide
interface
Syntax interface [ip-address | ip-int-name] [interface-type] [detail] [summary]
Context show>service>id
Description This command displays information for the IP interfaces associated with the service.
If no optional parameters are specified, a summary of all IP interfaces associated to the service are
displayed.
Parameters ip-address — the IP address of the interface for which to display information
Values a.b.c.d (host bits must be 0)
ip-int-name — the IP interface name for which to display information
interface type — displays either group or subscriber interfaces
detail — displays detailed IP interface information
summary — displays summary IP interface information
Output
The following output is an example of service ID interface information, and
Table 63 describes the
fields.
Info Option Keep — the existing information is kept on the packet and the
router does not add any additional information
Replace — on ingress, the existing information-option is
replaced with the information-option from the router
Drop — The packet is dropped and an error is logged
Admin State The administrative state
Table 62: Show Service ID DHCP Summary Output Fields (Continued)
Label Description
To Next Page
Loading...
