Alcatel-Lucent 7705 - Page 504

VPRN Services Command Reference
Page 504 7705 SAR OS Services Guide
sap
Syntax sap sap-id [detail]]
Context show>service>id
Description This command displays information for the SAPs associated with the service.
If no optional parameters are specified, a summary of all associated SAPs is displayed.
Parameters sap-id — the SAP ID for which SAP information will be displayed
Values See
sap for sap-id values
detail — displays detailed information for the SAP
Output
The following output is an example of service SAP information, and
Table 64 describes the fields.
Sample Output
*A:ALU-12>show>service>id# sap
===============================================================================
SAP(Summary), Service 6
===============================================================================
PortId SvcId Ing. Ing. Egr. Egr. Adm Opr
QoS Fltr QoS Fltr
-------------------------------------------------------------------------------
1/5/2 6 2 ip4 2 none Up Down
-------------------------------------------------------------------------------
Number of SAPs : 1
-------------------------------------------------------------------------------
===============================================================================
*A:ALU-12>show>service>id#
IPCP Address Extension Details
Peer IP Addr The remote IP address to be assigned to the far-end of the associated
PPP/MLPPP link via IPCP extensions
Peer Pri DNS The unicast IPv4 address for the primary DNS server to be signaled to
the far-end of the associate PPP/MLPPP link via IPCP extensions
Peer Sec DNS The unicast IPv4 address for the secondary DNS server to be signaled
to the far-end of the associate PPP/MLPPP link via IPCP extensions
Table 63: Show Service ID Interface Detailed Output Fields (Continued)
Label Description