Alcatel-Lucent 7705 - Page 512

VPRN Services Command Reference
Page 512 7705 SAR OS Services Guide
sdp
Syntax sdp {[sdp-id[:vc-id] | far-end ip-addr]} [detail]
sdp {[sdp-id[:vc-id]
Context show>service>id
Description This command displays information for the SDPs associated with the service. If no optional
parameters are specified, a summary of all associated SDPs is displayed.
Parameters sdp-id — the SDP ID for which SDP information will be displayed
Values 1 to 17407
Default all SDPs
vc-id — the virtual circuit ID on the SDP ID
Values 1 to 4294967295
ip-addr — displays only SDPs matching with the specified far-end IP address
detail — displays detailed SDP information
Output
The following output is an example of service ID SDP information, and
Table 65 describes the
fields.
Sample Output
*A:ALU-12>show>service>id# sdp
===============================================================================
Services: Service Destination Points
===============================================================================
SdpId Type IP address Adm Opr I.Lbl E.Lbl
-------------------------------------------------------------------------------
1:6 Spok 10.10.10.10 Up Down n/a n/a
-------------------------------------------------------------------------------
Number of SDPs : 1
-------------------------------------------------------------------------------
===============================================================================
*A:ALU-12>show>service>id#
*A:ALU-12>show>service>id# sdp 1
===============================================================================
Service Destination Point (Sdp Id : 1)
===============================================================================
SdpId Type IP address Adm Opr I.Lbl E.Lbl
-------------------------------------------------------------------------------
1:6 Spok 10.10.10.10 Up Down n/a n/a
===============================================================================
*A:ALU-12>show>service>id#