VPRN Services Command Reference
Page 516 7705 SAR OS Services Guide
service-using
Syntax service-using vprn [sdp sdp-id] [customer customer-id]
Context show>service
Description This command displays the services matching certain usage properties.
If no optional parameters are specified, all services defined on the system are displayed.
Parameters vprn — displays matching VPRN services
sdp-id — displays only services bound to the specified SDP ID
Values 1 to 17407
customer-id — displays only those services associated with the specified customer ID
Values 1 to 2147483647
Output
The following output is an example of service-using information, and
Table 66 describes the fields.
Statistics
I. Fwd. Pkts. The number of forwarded ingress packets
I. Dro. Pkts. The number of dropped ingress packets
I. Fwd. Octs. The number of forwarded ingress octets
I. Dro. Octs. The number of dropped ingress octets
E. Fwd. Pkts. The number of forwarded egress packets
E. Fwd. Octets The number of forwarded egress octets
Associated LSP LIST If the SDP type is MPLS, a list of LSPs used to reach the far-end
router displays. All the LSPs in the list must terminate at the IP
address specified in the far-end field.
If the SDP type is GRE, the following message displays: SDP
delivery mechanism is not MPLS
Number of SDPs The total number of SDPs applied to this service ID
Table 65: Show Service ID SDP Detailed Output Fields (Continued)
Label Description
To Next Page
Loading...
