ALIEN MEGA/MAX USER MANUAL
104
Figure 8.1.3 Set Trigger Camera of Motion Detection
Click Trigger Channel tab and select one or more channels which will start to record
or become full-screen monitoring when motion alarm is triggered.
4. Set arming schedule of the channel.
Select Arming Schedule tab to set the channel’s arming schedule.
Choose one day of a week and up to eight time periods can be set within each day.
You can click the Copy button to copy the time period settings to other day(s).
Time periods must not be duplicated or overlap.
Figure 8.1.4 Set Arming Schedule of Motion Detection
5. Click Linkage Action tab to set up alarm response actions for motion alarm
(please refer to Setting Alarm Response Actions in this Chapter.
Repeat the above steps to set up arming schedule for other days of the week.
Click the OK button to complete the motion detection settings for the channel.
6. If you want to set motion detection for another channel, repeat the above steps or
just copy the above settings to it.
You are not allowed to copy the “Trigger Channel” action.
To Next Page
Loading...