ALIEN MEGA/MAX USER MANUAL
164
12.4 Configuring More Settings
Steps:
1. Enter the General Settings interface.
Menu > Setup > General
2. Click the More Settings tab to enter the More Settings interface.
Figure 12.4.1 More Settings Interface
3. Configure the following settings:
• Device Name: Edit the name of DVR.
• Device No. Edit the DVR device number. This can be set in the range of
1~255. The default No. is 255.
• CVBS Output Brightness: Adjust the video output brightness via the CVBS
interface. The MEGA204, MEGA208 and MEGA216 provide no CVBS
output.
• Auto Logout: Set timeout time for menu inactivity. E.g., when the timeout
time is set to 5 Minutes, then the system will exit from the current operation
menu to live view screen after 5 minutes of menu inactivity.
• Menu Output Mode: You can choose the menu display on different video
outputs. Setting Auto will allow the DVR to self detect on bootup.
• Main CVBS Scaling: Enable/disable video output scaling for main CVBS
video output.
• Click the Apply button to save the settings.
To Next Page
Loading...