Alien MEGA204 - Configuring HDD Error Alarms; Configuring Privacy Mask

ALIEN MEGA/MAX USER MANUAL
151
10.8 Configuring HDD Error Alarms
Purpose:
You can configure the HDD error alarms when the HDD status is Uninitialised or
Abnormal.
Steps:
1. Enter the Exception interface.
Menu > Setup > Exceptions
2. Select the Exception Type HDD Error from the dropdown list.
3. Click the checkbox(s) below to select the linkage action(s) for HDD error.
The linkage actions can be selected from: Audible Warning, Notify Surveillance
Center, Send Email and Trigger Alarm Output.
Please refer to Chapter 8.8 Setting Alarm Response Actions.
Figure 10.8.1 Configure HDD Error Alarm
4. When the Trigger Alarm Output is selected, you can also select the alarm output
to be triggered from the list below. Click the Apply button to save the settings.
10.9 Configuring Privacy Mask
Purpose:
You are allowed to configure four privacy masking zones that cannot be viewed or
recorded by the operator.
Steps:
1. Enter the Privacy Mask Settings interface.
Menu > Video > Privacy Mask
2. Select the camera to set privacy mask.
3. Click the Enable Privacy Mask checkbox to enable this feature.