Alien MEGA204 - Chapter 4 PTZ Controls; Configuring PTZ Settings

ALIEN MEGA/MAX USER MANUAL
50
Chapter 4 PTZ Controls
4.1 Configuring PTZ Settings
Purpose:
Follow the procedure to set the parameters for PTZ. The configuring of the PTZ
parameters must be done for you control the PTZ camera.
Steps:
1. Enter the PTZ Settings interface.
Menu >Video> PTZ
Figure 4.1.1 PTZ Settings
2. Choose the camera for PTZ settings in the Camera dropdown list.
3. Click the PTZ Settings button to set the RS-485 parameters.
Figure 4.1.3 PTZ- General