ALIEN MEGA/MAX USER MANUAL
106
Figure 8.2.3 Set Arming Schedule of Alarm Input
5. Select Linkage Action tab to set up alarm response actions of the alarm input
(please refer to Setting Alarm Response Actions later in this chapter..
Repeat the above steps to set up arming schedule of other days of a week. You
can also use Copy button to copy an arming schedule to other days.
6. If necessary, select PTZ Linking tab and set PTZ linkage for the alarm input.
Set PTZ linking parameters and click the OK button to complete the alarm input
settings.
Please check whether the PTZ or speed dome supports PTZ linkage.
One alarm input can trigger presets, patrols or patterns for more than one channel.
However presets, patrols and patterns are exclusive.
Figure 8.2.4 Set PTZ Linking of Alarm Input
7. If you want to set handling action of another alarm input, repeat the above steps
or just copy the above settings to it.
To Next Page
Loading...