ALIEN MEGA/MAX USER MANUAL
109
2. Click the checkbox āEnable Tamper-proofā.
3. Drag the sensitivity bar and choose the required sensitivity level.
4. Click Settings to set handling method for video tampering. Set arming schedule
and alarm response actions for the channel.
1) Click Arming Schedule tab to set the arming schedule response action.
2) Choose one day of the week and up to eight time periods can be set within
each day. Time periods must not be duplicated or overlap.
Figure 8.4.2 Set Arming Schedule for Video Tampering
3) Select Linkage Action tab to set alarm response actions for video tampering
alarm (please refer to Setting Alarm Response Actions later in this chapter.
Repeat the above steps to set arming schedule for other days of the week. You
can also use Copy button to copy an arming schedule for other days.
4) Click the OK button to complete the video tampering settings for the channel.
Repeat the above steps to finish settings for other channels, or click the Copy
button copy the above settings to them.
5. Click the Apply button to save and activate the settings.
To Next Page
Loading...