ALIEN MEGA/MAX USER MANUAL
114
The higher the threshold you set, the greater the exception will be detected.
4. Click Settings to set handling method for video tampering. Set arming
schedule and alarm response actions for the channel.
1) Click Arming Schedule tab to set the arming schedule response action.
2) Choose a day of the week and up to eight time periods within each day.
Time periods must not be duplicated or overlap.
Figure 8.6.1 Set Arming Schedule for Video Quality Diagnostics
3) Select Linkage Action tab to set alarm response actions for video tampering
alarm (please refer to Setting Alarm Response Actions later in this chapter.
Figure 8.6.2 Set Linkage Action
Repeat the above steps to set arming schedule for other days of the week. You
can also use the Copy button to copy an arming schedule for other days.
4) Click the OK button to complete the video tampering settings for the channel.
5. Click the Apply button to save and activate settings.
6. (Optional) you can copy the same settings to other cameras by clicking the Copy
button.
To Next Page
Loading...