ALIEN MEGA/MAX USER MANUAL
39
Figure 2.3.2.1 Edit the Parameters
Channel Port: If the connected device is an encoding device with multiple channels,
you can choose the channel to connect by selecting the channel port No. in the
dropdown list.
2. Click OK to save the settings and exit the editing interface.
To edit advanced parameters:
1. Drag the horizontal scroll bar to the right side and click the icon.
Figure 2.3.2.2 Network Configuration of the Camera
2. You can edit the network information and the password of the camera.
Figure 2.3.2.3 Password Configuration of the Camera
3. Click Apply to save the settings and click OK to exit the interface.
To Next Page
Loading...