3.6.1 DISTURBANCE RECORDER
The Disturbance recorder screen, shown in Figure 60, displays a history of equipment disturbance records.
Figure 60: Fault recorder screen
A The Search box allows user to choose the period of time of the oldest to the latest, in order to display it in
the interface.
B The Manual Filter box allows user to filter the records manually, according to their selection.
C The Trigger and the Continuous boxes allow user to select either or both types of record to be present on
the list.
D The <LIST> button allows user to show the list of records according to the filtering parameters. If clicking
<LIST> finds no record available, a window will be opened with a message: "No records available´´. So click
<OK> and return to the previous section.
E Disturbance records listed, with the following information:
Time stamp: indicates the date and time of event log (yyyymm-dd hh:mm:ss[.uuuuuu] 0000 (UTC
time offset);
Cause: indicates threshold exceeded;
Duration: records length in seconds.
F The <DETAILS> button allows user to view information about the record. This information is also included in
the .HDR file.
To Next Page
Loading...